Bosch GTS1041A REAXX™ Jobsite Table Saw Takes User Safety to the Next Level and also Saves the Blade
Bosch Active Response Technology™ delivers flesh-detecting technology to help reduce potential user injury
Mt. Prospect, Ill., April 6, 2016 – Safety comes first on any construction jobsite, especially regarding a table saw where a momentary lack of focus could have permanent consequences. Bosch, a power tool industry technology leader, extends its heritage of award-winning table saw design with the introduction of the REAXX™ Jobsite Table Saw – the first saw with the company’s proprietary flesh-detecting Active Response Technology™.
The Bosch Active Response Technology platform helps reduce the risk of injury to users by combining advanced Bosch sensors and electronics with mechanical injury-prevention systems. The Active Response Technology system on the REAXX table saw detects human flesh that comes in contact with the blade and rapidly drops the saw blade below the tabletop. This high-speed action helps reduce the potential of serious user injury.
Fast Reset That’s Quick and Easy
After activation, the system can be reset in less than 60 seconds. A dual-activation cartridge enables activation for two incidents before replacement is needed; just rotate the dual-activation cartridge and reset the drop mechanism and the REAXX table saw is ready to go without damaging the blade. All necessary parts, instructions and wrenches are located onboard the saw, including storage for extra dual-activation cartridges.
“The REAXX Jobsite Table Saw is not a reinvention of the table saw category. Actually, the REAXX saw builds on the Bosch heritage of precision cutting tools and adds an extra layer of user safety,” said Jim Stevens, product manager, Robert Bosch Tool Corporation. “Bosch is a leader in the portable table saw market, and it makes sense that the REAXX Jobsite Table Saw incorporates great precision with the latest user interface and injury mitigation technology.”
The Bosch REAXX on-board control system is an intuitive, easy-to-understand LED light panel that communicates and manages saw operation and indicates saw status.
- Green means the saw is ready for use
- Yellow means the saw is in bypass mode and will not react to blade contact; this mode can be used for cutting conductive materials that could potentially activate the Active Response Technology system
- Red means the saw is not ready and will not function until the user corrects an issue
- Blue light means the saw requires service
Users can access a REAXX Android™ phone app, which uses near field communication (NFC) to provide saw registration, saw status and troubleshooting steps, lockout options, performance information, number of activations remaining and service requirements. In addition, an iOS™ phone app is available that provides information about saw registration and troubleshooting steps.
Legendary Bosch Table Saw Capability
Like all Bosch table saws, the Bosch REAXX saw includes a modular blade guard, the Smart Guard System. This primary safety device provides a physical barrier between the user and the saw blade, as well as offering protection against kick-back. Active Response Technology is integral to the REAXX Jobsite Table Saw and is intended to be used with the Smart Guard System to provide the operator with an added level of protection.
Bosch REAXX has a 15 amp, 4.0 hp max motor that generates 3,650 rpm. It’s jobsite ready because it works with onsite generators for a truly portable solution for mobile trade professionals. Cutting varied materials requires maximum horsepower and excellent cutting speed. The Bosch REAXX Jobsite Table Saw offers these attributes along with electronic control soft-start, constant response electronics and overload protection. Advanced electronics reduce the intensity of motor startup and maintain cutting speed under load.
Bosch REAXX is able to cut most non-conductive materials, including trated lumber without excessive water content.
Additional precision features include an optimized rail system that boasts a pre-squaring SquareLock™ Rip Fence, which is engineered for precision. Prior to locking, the fence glides along the rail and locks into place for solid and consistent cutting performance. The table is sturdy cast aluminum sized to rip up to 25″ on full-sheet materials (4 ft. x 8 ft.); an on-board rear outfeed support provides an extra 18″ of support for longer workpieces. A rugged sub-base is built to withstand daily abuse related to transport, storage or jobsite conditions.
Easy Transport on Any Jobsite
This full-featured jobsite table saw can be easily transported to and from the job thanks to the Bosch Gravity-Rise™ Stand, which sets up in seconds. The stand includes 8″ treaded wheels and is sized for easy pickup truck loading or unloading.
The Bosch REAXX Jobsite Table Saw will be available June 1, 2016. To learn more about REAXX, visit https://www.boschtools.com/reaxx. To learn about other Bosch products, visit www.boschtools.com or call 877-BOSCH-99. Check out www.bethepro.com for additional tips and videos.
Bosch Jobsite Table Saw Fact Box
|GTS1041A-09 REAXX Jobsite Table Saw with Gravity-Rise™ Stand and Outfeed||15 amp, 4.0 Hp motor
|25″ ripping capacity
|Saw 78 lbs., stand 45 lbs.
|3-1/8″ at 90°||5/8″||US: $1,499
Android™ is a trademark of Google Inc.
iOS™ is a trademark of Apple Inc.
- Like Bosch on Facebook: facebook.com/boschtoolsNA
- Follow Bosch on Twitter: twitter.com/boschtoolsNA
- Watch Bosch videos on YouTube: youtube.com/user/boschtoolsNA
Having established a regional presence in 1906 in North America, the Bosch Group employs some 28,700 associates in more than 100 locations, as of April 1, 2015. In 2014, Bosch generated consolidated sales of $11.3 billion in the U.S., Canada and Mexico. For more information, visit www.boschusa.com, www.bosch.com.mx and www.bosch.ca.
The Bosch Group is a leading global supplier of technology and services. It employs roughly 375,000 associates worldwide (as of December 31, 2015). According to preliminary figures, the company generated sales of more than $77 billion (70 billion euros) in 2015. Its operations are divided into four business sectors: Mobility Solutions, Industrial Technology, Consumer Goods, and Energy and Building Technology. The Bosch Group comprises Robert Bosch GmbH and its roughly 440 subsidiaries and regional companies in some 60 countries. If its sales and service partners are included, then Bosch is represented in roughly 150 countries. This worldwide development, manufacturing, and sales network is the foundation for further growth. In 2015, Bosch applied for some 5,400 patents worldwide. The Bosch Group’s strategic objective is to deliver innovations for a connected life. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.”
Additional information is available online at www.bosch.com, www.bosch-press.com and twitter.com/BoschPresse.
Exchange rate: 1 EUR = $1.1095
Bosch in North America
In the U.S., Canada and Mexico, the Bosch Group manufactures and markets automotive original equipment and aftermarket products, industrial drives and control technology, power tools, security and communication systems, packaging technology, thermotechnology, household appliances, healthcare telemedicine and software solutions. For more information, please visit www.boschusa.com, www.bosch.com.mx and www.bosch.ca.www.boschusa.com.
About Robert Bosch Tool Corporation
Robert Bosch Tool Corporation, the Power Tools Division of North America, was formed in January 2003 when Robert Bosch GmbH combined its North American diverse power tool and accessories businesses into one organization. As a manufacturing pioneer with more than a century’s worth of experience, the Bosch name has become synonymous with engineering excellence. Located throughout North America as part of the global power tools division, Bosch associates maintain a legacy of world-class design, manufacture and sale for power tools, rotary and oscillating tools, accessories and measuring tools. For more information, call toll-free 877-BOSCH-99 (877-267-2499) or visit www.robertboschtoolcorporation.com.
SOURCE: Robert Bosch Tool Corporation